Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-16-2003, 03:43 PM
za_w124_200e
Guest
 
Posts: n/a
Question battery tray - broken studs

Hi !
I traced a rattle coming from the front firewall to the battery. I noticed that two of the three bolts were broken (probably turned off when the nut was rusted).

Anyway, I can replace one (at the front) as it is on a raised plate that can be reached easily.
The other one fits directly to the body.
If I replace the broken stud with a bolt and nut (as on the raised part in the front), how will I reach the location of the stud that's on the body? I connot tell where to rach the bottom from ...
Any pointers, please?
TIA
L
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page