|
|
|
#1
|
|||
|
|||
Monovalve Repair Help!!
Help!!
I'm replacing the monovalve in my '88 560sl, and I don't remember how it came apart. (Alzheimer's is setting in early) I have the valve, a "wavy" washer (the both came from Fastlane), and a thin washer, a thick washer, and a big, thick washer... that were all inside with the bad valve. What order do all this pieces go in? I have the plastic housing and I believe it goes valve first (so the rubber diaphram sits directly in the circle inside the housing), thick washer, wavy washer, thin washer, and finally the big thick washer. I know this sounds crazy... but I really need some help!! M |
#2
|
|||
|
|||
The following site, from the archives, may be of some help:
http://mbdieseldiy.tripod.com/monovalve.htm Good Luck; I know well the feeling of messing up a sequence of parts. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|