Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-02-2003, 05:28 PM
Michael B
Posts: n/a
Monovalve Repair Help!!

I'm replacing the monovalve in my '88 560sl, and I don't remember how it came apart. (Alzheimer's is setting in early)

I have the valve, a "wavy" washer (the both came from Fastlane), and a thin washer, a thick washer, and a big, thick washer... that were all inside with the bad valve.

What order do all this pieces go in?

I have the plastic housing and I believe it goes valve first (so the rubber diaphram sits directly in the circle inside the housing), thick washer, wavy washer, thin washer, and finally the big thick washer.

I know this sounds crazy... but I really need some help!!

Reply With Quote
Old 05-02-2003, 06:17 PM
DHA DHA is offline
Registered User
Join Date: Jul 2002
Location: Atlanta
Posts: 54
The following site, from the archives, may be of some help:

Good Luck; I know well the feeling of messing up a sequence of parts.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page