Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-06-2003, 02:48 PM
Registered User
Join Date: Nov 2002
Location: Oklahoma City. OK
Posts: 38
removing 1999 c230 blower motor - torx or allen needed?

Some Board Members were kind enough to help me diagnose a problem with my acc fan blower motor and give info how to remove that unit. I got to the motor last night but the torx bits I have did not fit the four mounting screws holding the motor. Are those screws torx or allen? Thanks for your help.

Reply With Quote
Old 05-06-2003, 08:36 PM
Registered User
Join Date: Feb 2002
Location: east coast
Posts: 1,255
Torx, pulled my blower motor a few months back but cannot remember the size. this is the HVAC blower unit under the glove compartment.

while your at it, when you pull the motor out, wipe the cage clean and the ducting clean with a disinfectant like Lysol
Reply With Quote
Old 05-07-2003, 10:03 AM
Registered User
Join Date: Nov 2002
Location: Oklahoma City. OK
Posts: 38
Thanks to all that gave advice on the blower motor problem - I really appreciate it!

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page