|
|
|
#1
|
|||
|
|||
noisy driveshaft inspected
i went to inspect my driveshaft today and i found that if hold the front of it tight and move the back part i can only feel like 1mm of play and a solid feel to it, but if i hold the back part and and move the front i can hear and feel like metal against metal from the big 41mm bolt and like 2mm of play
the noise is very loud, any ideas |
#2
|
|||
|
|||
hheeeeeeeeelllllllllOOOOOOOOOOOOO
|
#3
|
|||
|
|||
heeeeeeeeellllllllllllllllllllllllloooooooooooooooooo (echo)
__________________
NormanB 230 TE (W124) 1989 with 153,000 miles on the clock - hoping for at least another 100K |
#4
|
|||
|
|||
jaja jaja jaja jaja
|
#5
|
||||
|
||||
What is the application?
I would recommend pulling it and having it checked out, repaired and balanced. Go ahead and replace the universal joint while it is out. I see you don't live around here and am not sure if there are companies around your area that rebuild driveshafts but I have used a company in Atlanta, Ga. USA called Driveline Service of Atlanta. They did a good job and it ran around US$250.
__________________
Jim |
#6
|
|||
|
|||
i dont think that the universal joint has gone bad, theres no play in it
|
Bookmarks |
|
|