Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-13-2003, 04:10 PM
Registered User
Join Date: Mar 2003
Location: Los Angeles, CA
Posts: 445
Recommended radiator re-core and radiator shop

This is really the conclusion to a post I started
replacing oil cooler hose)
but deviated enough to deserve a new post. Somehow I feel it is only fair to follow up with "what happened" after having pumped some of you for info.

My radiator was original from 1972, it has never been recored (just boiled out in 1986). I brought the radiator, oil cooler and overflow tank to Jerry, the owner of Reseda Radiator in Reseda, CA. He did a great job recoring this 31 year old radiator. I finally got to see what you get done when recoring a radiator. It really makes your metal radiator as good as new and saves a bundle of cash.

He also replaced the brass fill nozzle on the copper (brass?) overflow tank. For the last few years the top of the overflow tank was a mess because of a minor coolant leak. I had replaced the pressure cap a few times in the past thinking that was the problem. It was only after boiling/cleaning the overflow tank that we could see the barely visible hairline crack in the fill nozzle. Also boiled out the oil cooler which was still in excellent mechanical shape, although somewhat sludged up. He even painted all three parts to the original black. All this for just under $300 ($250 for the recore). I highly recommend him as he is an expert on MB radiators (plastic too). I believe he does shipping if you're not in the area. Just google Reseda Radiator if you want to get his web page and phone #.

It's important to unscrew the two (I have a V-8) engine block coolant drain pugs to completely empty the coolant. There is a lot that stays in the block after draining the radiator. I also decided to replace the thermostat for cheap insurance. Before putting in the new one I shoved a hose in the thermostat opening and trickled water for 30 minutes. I used a rag to stuff close the thermostat opening around the hose so that the water actually fills up the passages in the block before exiting out the two drains. The rag does the job supprisingly well. Jerry advised me to stay away from an acid chemical flush since my engine is over 30 years old. He felt a clean water flush would be good enough.

Under 1/2 qt of oil lost from disconnecting the oil cooler lines. About 4 qts of trans fluid is lost from the transmission cooler line when they are disconnected from the radiator.

Used MB coolant for the first time in decades for this engine. Was using any coolant I could get on sale up to now (Prestone, Texaco...). After reading the posts here on coolant I decided to get religious and buy MB stuff. 50-50 mix with water. Car is back on the road as my daily driver.
1972 450SL
1982 300D Turbo
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page