|
|
|
|
|
#1
05-16-2003, 05:39 PM
|
|||
|
|||
|
what socket do I need to....
Hi everyone
The car is a 85 190E 2.3 (w201), I'm trying to replace a halfshaft, but I can't find a tool to get the double collar hex nut off, at least I think tihs is what they call it. This is the nut that is sitting at the wheel, it also has a crimp lock. I read in the manual that it's supposed to be a 30mm, but a 30mm what exactly? Second quesiton is, what is a good way to tighten it to the required force? manual states 270-320Nm, The rest I can do without a problem, I think at least, I just swapped my differential and noticed that one of these shafts is badly worn and was rebuilt already, I got a used one from a junk yard and want to replace it some time soon. I also think it is the reason why I hear this wha-wha-wha noise from the back when driving. help is greatly appreciated. xp
__________________
1985 190E 2.3L - a constant project. 
|
|
#2
05-16-2003, 06:41 PM
|
||||
|
||||
|
30mm collar socket 126 589 02 09 00. I believe this is what MB calls the 30mm. 12 pt. socket, but double-check me. FWIW. Wow, at 270-320 Nm., I'd have to use a bottle jack on my torque wrench handle
 .
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later)
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
