Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-19-2003, 08:47 AM
Tod Labrie
Posts: n/a
Exclamation HELP! - Ignition Problems On A 123

Yesterday, I tried to replace the ignition tumbler on a 1985 300D. Prior to doing so, I read the numerous postings here about such a task. I was able to get the black metal collar off which enabled me to get the ignition tumbler out. The problem is installing the new tumbler. Without the collar, the new tumbler aligns perfectly in position 1, the detente button pops up and locks itself. The key rotates to all positions (0,1,2). I can't get the collar to screw on with the tumbler. With the tumbler and key in position 1, (and the small wire protruding), the collar screwed on easily. After it screwed on fully, I removed the wire which allowed the detente button to click into place on the collar. At that point, I could NOT turn the brand new ignition key (in the new tumbler) left nor right, in nor out. The key was stuck in position 1. It took me 20 minutes of inserting that wire in position 1 to free it enough to unscrew that collar. Why isn't this working?
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page