Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-22-2003, 05:33 PM
Registered User
Join Date: Nov 2000
Location: Umeň,Sweden
Posts: 46
4matic front driveshaft boot question

I have a bad inner boot on the drivers side on the front axle.
Do i have remove the axle completely to change the inner boot ?
If so, are there any thing to consider except from just unbolting it ?

300E 4M -89 ,5 speed

Reply With Quote
Old 06-09-2003, 04:21 PM
Registered User
Join Date: Nov 2000
Location: Umeň,Sweden
Posts: 46
Here is the work

took out all of 6 allen bolts.
There is not so much space to fit good allen tools.
I used a standard 8 mm allen tool and turned the wheel backward ,quite easy.
Hammered out the little lock thing on the center nut.
Removed the big center nut with a 30mm tool.
Use large tools for the 30mm nut.

Now the pain begins.

How do i get the axle out from there ?
I tried almost every angle but it never seemed to be enough.
Finally i turned the wheels to the left and lowered the car completely and then there was enough clearance.

The rest of the job is cleaning and assembly and put it back again.

Pelle 300E 4M -89
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page