Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 06-01-2003, 07:07 PM
Posts: n/a
Question 88 300E rear window regulator

My 88 300E rear window is stuck in the up position. I'm trying to remove the regulator to enable testing and repair. The cable that runs to the upper window track is tight and the cable that runs to the lower track is slack. The door switch has 12 volts at the pins. How do I disconnect the regulator from the window track and remove the regulator from the door with the window in the up position? Will the regulator with window attached just manuver out the hole in the door once I remove the attaching bolts?

I just finished repairing my front door regulator based on the information in threads on this website.

Thanks for any help! Dave.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 01:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page