Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-10-2003, 11:57 AM
Posts: n/a
How Do U Install "EURO" lights? W123

I just found a pair of Bosch euro-lights! I'm sure I can easily secure them to the car, but I don't know how to go about with the electrical connection, since the Euro and U.S. plugs are different. Please contact me if you have done it before. This is for a MB W123.
Reply With Quote
Old 07-10-2003, 12:29 PM
Posts: n/a
The plugs are not different. The harness in the car connects to the headlight assembly not the sealed beam.

To change to Euros, you simply bolt them in and then you will have to move the pins around in the car harness connector to match the pinout of the Euro headlight.

I think that there is a post here with the instructions for moving the pins around. I did mine before that post was there. I simply took an ohmmeter and probed around to find out which pin on the headlight assembly does what, then move the connector pins around.

Have a great day,
Reply With Quote
Old 07-10-2003, 12:36 PM
Posts: n/a

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page