Let me rephrase my last question.

Can I use banana clips for + (red) and - (black) and connect them to the X11/21 (LED connector) #3 and #1 respectively? This is not the X11/4 38 pin connector.

Also, what do you recommend I use for the yellow (test) connector that gets plugged into the X11/4 connector? (ie... #23 for testing Alarm DTCs). The only though I had was to stick a staightened out paper clip in the hole and use an alligator clip on the test wire.

__________________
Willy

'94 E420 White

Mods
-------
Berg Werks Keyless Entry
Buzzer replaced with Chime
Dash Light Upgrade
Burlwood/Leather shift knob
Alpine CDA-9815 Head Unit
2002/2003 16" C Class 7-Spoke Wheels
Updated "Chip" to fix Code 19 problem