|
|
|
|
|
#11
08-07-2003, 10:38 AM
|
||||
|
||||
|
Here's what my DTC Manual says for your DTCs.
Pin 6: ABS 13 - Brake Lamp Switch 25 - Left front vehicle speed sensors 26 - Right front vehicle speed sensors Pin 7: EA 7 - CAN data bus signal from EA, ABS, LH-SFI control module faulty 11- Closed Throttle recognition signal to engine control module, LH-SFI. Fuel safety shut-off to engine control module, LH-SFI Pin 8: Base Module 9 - Voltage supply for LH-SFI control module interrupted 10 - Same as above plus voltage supply for fuel-injectors interrupted 11 - Voltage supply for accessory equipment control module interrupted. 12 - Voltage supply for ABS or ABS/ASR or ASD control modules interrupted. 13 - NOT USED ??? Pin 30: SRS 4 - Right front ETR squib Interesting codes! I quess you had no codes in the other modules since you didn't post any other module? The SRS is a DIGITAL module so surprised you got codes from it. Convience Features are reserved for the '140' car, so don't know what that pin is??? Are you sure it's '30'?? How's your wiring harness??? I would reset all of the codes and then see what comes back in a few days. 
|
| Bookmarks |
|
|
Threaded Mode
