ABS light on after changing rear diff - need help

2phast · #1 08-06-2003, 10:12 PM

I just finished installing a late 87 190E 16 valve diff (3.27:1 LSD w/ABS) and now my ABS light is on and it appears that ABS is not working.

I did not use my original speed sensor in this diff, I used the speed sensor that came with the 16 valve diff, the two sensors were not quite idential, one being longer than the other and one having a small protruding tip.

So my question is: Should I have used my original speed sensor in the 16 valve diff or could the 16 valve speed sensor I am using just be defective? I have to assume this is the cause of the ABS malfunction, as everything was just fine before the diff swap.

Any assistance would be appreciated.

2phast · #2 08-07-2003, 11:44 AM

Anyone?

nthach · #3 08-07-2003, 02:25 PM

sensor air gap? or maybe a bad sensor/wiring fault?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode