Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-22-2000, 10:02 PM
300EVIL's Avatar
Moderator Incarnate
 
Join Date: Apr 2000
Location: Lake Geneva, WI.
Posts: 1,676
is it worth it to get a GTC camshaft for my 87 300E???
will i get any more power??
i heard it lowers the power on takeoff?
is this true??

Reply With Quote
  #2  
Old 04-22-2000, 10:16 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
I have read the specs on this cam. As I recall, it comes to life in the upper RPM range (15-20 HP increase) Starts to pull about 4500 RPM on out to the redline. Improving the breathing helps with this type of a stick, and I don't mean just an air filter i.e. K&N. You need to set something up to give the throttle body a straight shot of fresh air. Can be done. HA (anything can be done with enough $$$) This stick will not do diddly for your bottom end, in fact, it might make it worse. Kinda have to rob Peter to pay Paul.
BTW Adam, the M103 was never designed to be a torque monster. You need stroke and cubic inches for that. This is a mid to top end motor and that's what it does best. Get someone to cut you a set of 4.11's for the rear end or stuff a big block chevy in there and be sure to buy a good supply of flex couplings, cuz' you'll need them.
------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325

[This message has been edited by jeffsr (edited 04-22-2000).]

[This message has been edited by jeffsr (edited 04-22-2000).]
Reply With Quote
  #3  
Old 04-24-2000, 07:23 AM
LarryBible
Guest
 
Posts: n/a
Adam,

Whenever you change to a camshaft with increased duration, you are basically shifting the power band to a higher RPM range. Additionally, one of the most important aspects of building power, is for everything to work together. That is, the cam timing, intake system, ignition timing etc., should be well matched.

Although I don't doubt that the camshaft would give you an extra 15 horsepower, it will be at a higher RPM range for which the other components were not designed. And it will be at the cost of what little bottom end torque the engine has.

In Germany cars are taxed(heavily) based on engine displacement. For this reason, the engines are already designed to make quite a bit of horsepower for their size. This is done by building that horsepower at a higher engine speed range. In an American V8, there is a lot of room to get more power by shifting the power band up, with a camshaft. The German engines don't give you much room for this.

------------------
Larry Bible
'84 Euro 240D, 516K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
replacing camshaft on an M103 dirtysocks Tech Help 17 02-23-2005 08:42 PM
Camshaft Seal Replacement rsmcmahon Tech Help 4 09-23-2004 10:20 AM
300E - Persistent camshaft seal leak - Opinions? Zeus Tech Help 17 09-14-2004 02:00 PM
need help! 240D camshaft codes? Brian_Wall Diesel Discussion 0 03-27-2002 01:10 AM
uprated 240D Camshaft Brian_Wall Tech Help 0 03-23-2002 03:04 PM



All times are GMT -4. The time now is 04:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page