|
|
|
|
|
#1
01-01-2015, 09:21 AM
|
||||
|
||||
|
Plug for small X11 diagnostic socket?
G'day Folks,
I'm about to try and set the ignition on my W201 correctly in accordance with chapter 15-515 in the FSM. I need to mess about with an oscilloscope to do this correctly. I'd like to make a connection between the small X11 port shown in the following pictures...   ...with my oscilloscope that has BNC connectors. Where can I find a plug that will go into the socket so I can wire away to my heart's content? I'd rather have a solid (reliable) plug than be messing about with scope / multimeter probes.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior  Don't leave that there - I'll take it to bits! 
|
| Bookmarks |
|
|
Threaded Mode
