|
|
|
|
|
#1
05-06-2000, 08:06 PM
|
|||
|
|||
|
I just recently purchased an '88 300E. Checking on things under the hood, I tried to check on the air filter. There are 4 nuts on the top of the cover, along with the 6 clamps. The stud which would be in the 10 o'clock position is stripped at the bottom (inside or under the cover). Any suggestions on how to remove the nut from the stud? Or how do I get to the stud?
------------------ 
|
|
#2
05-06-2000, 08:55 PM
|
|||
|
|||
|
I have had luck releasing all of the fasteners and holding upward pressure on the lid. Use a small impact to take off the nut. The hammering action of the impact will take it off.
------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope  1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rebuilt Turbo & New Air Intake - Pics! | TomJ | Diesel Discussion | 34 | 09-14-2005 07:39 PM |
| $45 air filter?!? Geez!! | braverichard | Diesel Discussion | 10 | 01-21-2005 05:53 PM |
| Oil in the Air Filter (and not from the vacuum pump) | MBwD | Diesel Discussion | 11 | 04-09-2004 11:26 PM |
| ITG Air Filter for C-Coupe | C-Monkey | Mercedes-Benz Performance Paddock | 1 | 07-27-2002 02:29 PM |
| Air filter housing for 1991 420SEL | BENZ-LGB | Tech Help | 1 | 05-11-2001 05:18 PM |
Linear Mode
