Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-03-2003, 10:43 AM
Registered User
Join Date: Feb 2002
Posts: 2,292
Motive Products Brake Bleeder

My Motive Products bleeder works well for flushing and for bleeding air when work is done at one of the wheels. It does not work so well when trying to bleed an entire system. It seems like the bleeder does not push the fluid with enough velocity to push the air past the high spots. Wondering why that was the case, I looked inside the bleeder and found it has a tiny tube to draw the fluid from the bottom of the container. Would it make sense to modify the bleeder so that tube is larger? Is there any way a higher flow rate could cause damage to the brake system?
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page