I have some ragged out synchros 1-2, anyone ever dive into one of these? The exploded view doesn't look to bad, any ideas? Thanks! BTW Somewhat advanced DIY/former Aircraft mechanic...

The MB trans in that car uses tapered bearings on the main shafts. You need to "set-up" the friction play(special tool) on them any time that a part is replaced. Other than that it is a breeze.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator