Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 10-16-2003, 09:11 PM
Posts: n/a
how to clean idle control valve

380sl races at drive and neutral to 1500 rpm initial idle is about 700rpm at cold start runs smooth at 700 but is rough if shift at stop to neutral. could this be the idle control valve a tech looked at it recently and said it was probably rthat since everything else is almost new.
directions on removing ang cleaning idle control valve iknow on the 380sl they are about $250 can they be cleaned?
can parts be replaced in them?
anything else cause racing idle at neutral and park?
Reply With Quote
Old 10-16-2003, 10:54 PM
Newbie Benz Driver
Join Date: Dec 2002
Location: Between Oakland and Vallejo, CA
Posts: 253
Use some carb cleaner, and a set of brushes that will fit in the ofrices.
1984 380SL-driving and service privileges.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page