|
|
|
#1
|
|||
|
|||
Rough Running 16V 190E
For the past 3 weeks I have been trying to sort an extremely rough running 190E 2.5 16V none CAT model. The original problem was rough running on idle and high hydro carbons. All the obvious, such as air leaks, plugs, cap, leads, rotor arm, valve clearance, valve seats and new injectors, have no difference what so ever. I'm tearing my hair out over this now!!
Help us Obi One - You're our only hope....................
__________________
Deutsch Technique Units 12-15 Athron Developments Churchill Road Doncaster South Yorkshire UK Tel: +44 01302 328 906 |
#2
|
|||
|
|||
I'm sure that the compression has been checked already but I didn't see that on your list. If not make sure to check the compression.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Try a new fuel filter. Fuel filter's really mess up a lot of older Benzes.
If anything, will improve your performance down the line. |
Bookmarks |
|
|