Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-07-2003, 03:26 PM
Registered User
Join Date: May 2002
Location: Indy
Posts: 102
Unhappy 560 SEL No Start

My SEL has had a hard start situation for a few months. It always starts, but I have to crank on it for a minute (seems alot longer) when it did start it would idle very rough, and any added gas would cause the car to die. Once it warmed up things were fine. The guy I bought the car from said that he had some adjust the car so it would start. Anyhow, I went to the dealership and the tech said to run some techron through the motor, which I did. It helped at first, but then the problem got worse. I spoke w/the tech again, and he suggested the control head was probably varnished up. So I purchased a new one and installed it. Now the car will not start at all. When I push down on the sensor plate w/ the oumps running there is a screaming sound from the injectors. I know the question will be did you mess w/the mixture screw. I DID NOT. I can hear fuel or air at the injector head. Any suggestions?
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:21 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page