|
|
|
|
|
#1
12-12-2003, 10:14 PM
|
|||
|
|||
|
Flex Plate Bolts
On my 1984 300D turbo I have to replace the flex plate and would like to know the torque and number of degrees for the 12 stretch-neck bolts that hold the flex late to the crank shaft.
Thanks 
|
|
#2
12-13-2003, 04:01 AM
|
||||
|
||||
|
30-40Nm then 90-100-degrees. Don't forget Lok-tite. I use the blue kind.
A tightening sequence similar to what's recommended for a 6-lug road wheel is probably a good idea. Sixto 95 S420 87 300SDL 83 300SD ... $950, see cars forum
|
|
#3
12-13-2003, 11:45 PM
|
|||
|
|||
|
neck bolts
Thanks for your help and great info. I trust the info I get from this board. Thanks again
John.
|
 |
| Bookmarks |
|
|
Linear Mode
