Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-16-2003, 11:43 PM
Registered User
Join Date: Oct 2003
Posts: 25
Advice on removing regulator

I am having trouble removing the regulator on a 94' E320. I have remove the blower motor and the mount. The only way I could get the regulator out was to seperate the regulator from the heat sink. I connot get the heat sink out. There is a small piece of plastic in the center of the blower housing. I removed the front 2 screws. I can pull this plastic piece up a little bit, but not enough to remove the heat sink. I have ordered a new regulator and need to get the old one out.
Thanks JKT
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page