Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-29-2003, 11:53 PM
Registered User
 
Join Date: Aug 2002
Location: SAVANNAH GA.
Posts: 117
Talking 91 300e license plate light wiring

Found the light bulb indicator light on the other day.Noticed license plat light was out,changed bulb....nothing! Voltage check@the socket revealed 0 volts. Checked wire from light control modual to license plate light socket and found an open circuit.Found a broken wire in the conduit attached to the left trunk hinge. Also found several other wires in this area that were about to fail.If your plate light is out and there is no voltage @ the socket ,this is a good place to check!Problem most likely caused by repeated opening and closing of trunk. Hope this info is helpful to some one!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page