|
|
|
#1
|
|||
|
|||
Door lock disassembly
Dear all
I can't open the door lock on the driver's side of my 300TE with my key. Closing however works. I figured out how to take out the lock. However I do not see how to and remove it from the attached electric cable and disassemble it in order to make it work again. Any input would be highly appreciated! Yours, Bruno |
#2
|
|||
|
|||
Bruno,
You will have to take the upholstery of the door to gain access to the switch and wiring. Try this site : http://ow.no/mb/w124/tech/ http://ow.no/mb/w124/tech/electrical/centrallockingsystem.html Unfortunately the removing of the upholstery-site is not available anymore. But I hope this will help you out. Good luck, Danny |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|