|
|
|
#1
|
||||
|
||||
300E Floor Heat Problem
My 86 300E has no heat directed to the floor. I know this is a common problem and I have tried a couple of things suggested in other posts.
I tested the servos for the floor heat by connecting their vaccuum line directly to the "input" green vaccuum line. The heat came roaring out of the foot vents. I took apart the climate control panel and resoldered the circuit board where the switches and connectors attach as well as other questionable joints. There was no change. I don't detect any vaccuum at port 3 on the valve block and I can't get the floor servos to work when I connect their hose to any other port. Any suggestions? Also, if I have to, how do I access the servos to replace them? Thanks, Paul |
Bookmarks |
|
|