engine diag. light, what do they mean?

hello there,

I was wondering if anyone can tell me where I can find the legend for blinks on my 1993 400e... any help would be great!




------------------
--
Kyle
1992 400E Emerald Green
http://mercedes.buyitsellit.com
Post your Auctions, Classifieds, Want Ads FREE

[Benzmac]

The codes and what they mean are in the Service CD offered by us. This is a factory CD and has all of the service information of this nature you will need.

------------------
Benzmac:
Donnie Drummonds
1991 GMC Syclone
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

Benzmac,

Ok, I guess I was just afraid to find out what was wrong with my car, but I get two codes: 9 and 26...

Any idea off the top of your head on what those are? Keeping my fingers crossed that it isn't anything major... the car still runs great. Thanks.

------------------
--
Kyle
1992 400E Emerald Green
1984 BMW 533i Charcoal Grey
http://mercedes.buyitsellit.com
Post your Auctions, Classifieds, Want Ads FREE

[mbdoc]

#9 code is for the intake air temp sensor, might be unplugged(by left headlamp). Code #26 is about the upshift delay system that warms-up catalyst in the morning. W/fax # I will send complete list.

Phew... I was thinking the worst for a minute there... I'll check to see if the sensor is unplugged. As for the upshift delay, I am going to take my car in to the dealer to get it reset due to alarm problems, and we'll see if that helps, because as far as I know the car shifts fine. Thanks for the info, and that would be great if you could fax the list to me :-D

Fax#: (603)325-3083

------------------
--
Kyle
1992 400E Emerald Green
1984 BMW 533i Charcoal Grey
http://mercedes.buyitsellit.com
Post your Auctions, Classifieds, Want Ads FREE