|
|
|
#1
|
|||
|
|||
Hello, 1st timer.
my 89 560sl 155k ..live in rural area, many miles to dealers Problem: changed oxy sensor, couldn't get connector out of frame rail? so, I spliced new to old..2 white wires 1 dark wire...Car ran like new for ten miles and died...switched white wires, ran two minutes and died, as in fuel starved.. turns over wont start, disconnected oxy entirely,still won't start... what did i foolishly do?? thanks, took me a day to find this site. Marty 89 560sl 97 528i 00 Z3 2.8 87 Tojan 94 Disco 61 Mark Nine 96 RT 1100 |
#2
|
|||
|
|||
Two things come to mind. Something else is wrong,... which leads me to ask why you replaced the 02 sensor in the first place. If it started and ran for ten minutes then died, you've got something else going on. Also, the sensor may be bad, crosswired or shorted internally..Good Luck..
------------------ Jeff Lawrence 1987 300e 1989 300e 2000 Dodge Grand Caravan SE |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FAIL Emission Test | andrew1413 | Tech Help | 20 | 04-05-2004 04:07 PM |
Engine light DTC codes? 1994 S600 Coupe | 600sleeper | Tech Help | 3 | 02-24-2003 05:28 PM |
Coolant sensor circuit terminology | DPH | Tech Help | 0 | 03-13-2002 08:40 PM |
86 M103 Oxy Sensor Check | ChinaClipper | Tech Help | 0 | 11-07-2001 06:26 PM |
oxy sensor for Steve Brotherton | whiterocks | Tech Help | 1 | 09-04-2000 01:06 AM |