|
|
|
|
|
#1
08-31-2000, 08:42 PM
|
|||
|
|||
|
The aux fan in my 16 valve is not running. When I turn on the a/c, shouldnt the fan also turn on? The clutch controlled fan on the inside of the engine compartment engages and also engages into the high speed mode as when the a/c is turned on. However, the aux fan doesnt turn on. What can I do to test if the motor is bad? The fuse for the fan isnt blown. Thanks, Joe
|
|
#2
08-31-2000, 10:21 PM
|
|||
|
|||
|
The auxillary fan is not controlled by the compressor clutch. It is controlled by pressure in the A/C system. After it runs above 250 or so, the fan will come on low.
You will need to bridge the high pressure switch connector to test. ------------------ Benzmac: Donnie Drummonds 300E ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
|
#3
09-02-2000, 09:26 PM
|
|||
|
|||
|
Can you tell me how to bridge the pressure switch without causing any electrical problems? Thanks, Joe
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M119 Viscous Fan mod & problems with aux. fan resistor-mod | ke6dcj | Mercedes-Benz Performance Paddock | 92 | 05-19-2010 11:36 AM |
| Aux fan powering up | The Warden | Diesel Discussion | 1 | 02-13-2004 10:31 PM |
| '88 300SE Aux fan resistor location | 53eguy | Tech Help | 1 | 08-16-2002 05:39 PM |
| Valve stem seal RR | David.kingsbury | Tech Help | 3 | 08-06-2002 08:42 PM |
| M103 Valve guides | edbardzik | Tech Help | 3 | 06-01-2000 08:37 AM |
Linear Mode
