![]() |
|
|
|
#1
|
|||
|
|||
While replacing the spark plugs in our 94 C280 I noticed when the crossover tube was remove that there is a line with no fitting on it. It is located about the number 5 and 6 fuel injector rail right under the wiring harness. It looks like about a 5/16 or 3/8 id with barbs which to me would indicate a vacuum line of sorts. Cannot not locate anyting else that this open port would be connected to. Any and all ideas welcome, well except for the any UFO theories! Thanks LH
And the car appears to be running well, since plugs and fuel filter change out getting about 24 mpg at about 70+ mph. |
#2
|
|||
|
|||
This is a blind hole. No hoses here. You are quite observant though.
------------------ Benzmac: Donnie Drummonds 300E ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
C280 rough engine only when in gear | pikachu | Tech Help | 24 | 06-07-2008 05:30 PM |
the 1994 - 200 Mercedes Benz C280 engine overheating problems | ascona | Tech Help | 3 | 07-23-2003 11:40 AM |
ML320 engine question | Motorhead | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 9 | 02-21-2003 10:46 PM |
1995 C280 Engine Miss & Steering Vibration | Robert C. Eberhardt | Tech Help | 5 | 09-27-2002 02:41 PM |
96 C280 Engine Rotation? | Martineau Gauda | Tech Help | 1 | 06-21-2002 07:18 AM |