|
|
|
#1
|
|||
|
|||
need help locating distributor coil
im trying to hook up an aftermarket tach and am wondering where the distributer coil is to hook it up.
here are the instructions http://hp.autometer.com/instruction...uctions/917.pdf if you have any other suggestions please help. Ill be working on this thing all night. Thanks. if you have diagrams, if you could please link them. Thanks again
__________________
1993 400e Charlotte |
#2
|
||||
|
||||
Assuming you're talking about a 93 400E like your sig line suggests -
Wherever they are there's 2 of them so you have to run the tach in 4 cyl mode. Pull the front engine cover behind the left headlight and follow the cable from the middle of the distributor to the coil. I suggest to try that because in the S420 the coils are tucked just behind the left headlight. Then of course - why? Sixto 95 S420 87 300SDL |
#3
|
|||
|
|||
do u know any place i could look for a diagram of the m119? I know there are some in the performance products catalogs, but i cant find one. Is there one online?
__________________
1993 400e Charlotte |
#4
|
|||
|
|||
ok, found the distributor. I need reccomendations as to what 12 volt source to hook the tach up to. Also, what bolt is positive and what bolt is negative on the coil? Thanks
__________________
1993 400e Charlotte |
#5
|
|||
|
|||
anybody?
__________________
1993 400e Charlotte |
Bookmarks |
|
|