|
|
|
#1
|
|||
|
|||
Switchover Valve 190E
Hey all:
I purchased the updated switchover valve 201-800-05-78 that replaced the two switchover valves in the climate control system of the 190E. Does anyone have the Mercedes service bulletin on how to install the updated version? It looks like I have to use a T to connect two vacuum lines to one connector of the new switchover valve...is this the case and can I use any type of vacuum T? Also, which of the two electrical connectors from the old valves goes where? Thanks in advance.
__________________
1985 190E 2.3-16 Euro |
#2
|
|||
|
|||
Ok I figured out that all I have to do with the vacuum lines is simply T them. However, the plugs from the two old switchover valves (one has 4 connectors, one has 5) are not marked, so how do I know which receptacle to plug them into on the updated switchover valve? Thanks in advance.
__________________
1985 190E 2.3-16 Euro |
#3
|
|||
|
|||
just plug them in! If the flaps don't work correct plug them in the other way.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|