So far I have replaced the rear shocks, control arms and the stabilizer bar bushings but I’m still getting a very loud squeaking when I turn. Any suggestions?

Thanks,
Magic

__________________
98 E320 175,600m
99 ML320 175,500m
as of 12/2012

Does your car have rear subframe mounts?

Sixto
95 S420
87 300SDL

I dont Know!!

__________________
98 E320 175,600m
99 ML320 175,500m
as of 12/2012

Have you checked your thrust arms?

If the supporting joint (also called wheel carrier bushing) on the rear axle carrier is shot, then it starts to squeak.

It is located where the rear lower control arm connects to the axle carrier and is basically a ball joint.

To suppress the noise temproarily, spray a little WD 40 onto the joint.

If you have the Mercedes Manual on CD, then refer to file 35-116.pdf in the chassis folder for instructions to replace it. Also, a search on this forum will yield pointers on replacing it.

It is listed as a Control arm bushing under suspension in Fastlane's online catalog.

__________________
1986 300E (3/2002) Rear ended and totaled (10/2009)
2000 Xterra (5/2000)
1992 400E (11/2009) -Sold
1986 300E (12/2009) - Sold
2004 E500 Wagon (6/2013) - Sold

That was it hs

Thanks....

__________________
98 E320 175,600m
99 ML320 175,500m
as of 12/2012