|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
How to attach Torque Converter to Auto Transmission properly ???? 190E
I am ready to attach my transmission to my newly rebuilt engine. Now, the Torque Converter is out of the automatic transmission. It may seem too easy to simply plug the TC and let it go, but I know that if the TC is not attached properly, the transmission might not work.
So, in what position does the shift selector on the transmission has to be for the torque converter to be properly attached ??? Any comments greatly appreciated. |
#2
|
||||
|
||||
Shift selector position does not matter. As you are installing the TC you have to rotate it while pushing it in. You will eventually feel it click or slip (for lack of better terms) into position. After you do it one time pull it back off and try it again. After you have done one you will know what I am talking about with the click or slip.
__________________
Jim |
Bookmarks |
|
|