![]() |
|
|
|
#1
|
|||
|
|||
Changing brake pads on W211, 2003 E500
I am planning to change the brake pads to Porterfield after reading good reviews. I have changed brake pads on different make of cars before, but the W211 seems to be very much different due to the electronic brake system. I understand that I need a SBC 102 tool to deactivate the pressure in the system in order to safely remove the pads. How expenesive is this SBC 102 Tool? Can someone please enlighten me in the procedure to change these brake pads. Is it that much complicated compared to ordinary brake system? Many thanks in advance.
__________________
Flash Gordon 2003 E500 BlackOpal/Charcoal 2004 Infiniti G35X |
#2
|
|||
|
|||
I need help, please.
__________________
Flash Gordon 2003 E500 BlackOpal/Charcoal 2004 Infiniti G35X |
#3
|
||||
|
||||
Replacing the brake pads on an SBC equipped vehicle is no more difficult than on any other MB, however the system needs to be de-activated to prevent the SBC system from performing what's known as a "Pre-Drive Check". When this occurs, the system is pressurized at approx. 60 BAR. I'm not sure about an "SBC 102" tool. I use SDS.
|
#4
|
|||
|
|||
Quote:
![]()
__________________
Flash Gordon 2003 E500 BlackOpal/Charcoal 2004 Infiniti G35X |
#5
|
||||
|
||||
I bet the tool is not cheap, ask the dealer.
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#6
|
||||
|
||||
Here is a link to a previous thread discussing the sbc deactivation.
Anyone replace brake pads on new '03 E-class??
__________________
Ali Al-Chalabi 2001 CLK55 1999 Dodge Ram 2500 Cummins Diesel 2002 Harley-Davidson Fatboy Merlin Extralight w/ Campy Record |
#7
|
|||
|
|||
Quote:
I guess I won't put on the Porterfield pads by myself and I will go to a local MB shop for that ![]()
__________________
Flash Gordon 2003 E500 BlackOpal/Charcoal 2004 Infiniti G35X |
![]() |
Bookmarks |
|
|