What is the torque spec for the trannie pan bolts on a c280, 1994?

Thank you.

__________________
1994 C 280 117.5k, White (Good as new)
1997 Toyota Camry 149k Miles (Not so pretty anymore)

1990 190e 2.6 95k (Sold-Should not have)
1981 240d Stick ??? Miles...sold

8 Nm or 6 lb ft.

You will need a professional torque wrench ,I use a CDI 6002DIN about 175 bucks. Those tranny pan bolts are very touchy and easy to over torque I ruined a pan before I got my CDI.

William Rogers.......

Thanks. I think I slightly overtightened last time because it was a little leaky around the pan. But not too bad. I have a torque wrench and I'll go easy. I got the wrong gasket from the dealer so this job has become a 2 day affair. I'll finish it up tomorrow.

__________________
1994 C 280 117.5k, White (Good as new)
1997 Toyota Camry 149k Miles (Not so pretty anymore)

1990 190e 2.6 95k (Sold-Should not have)
1981 240d Stick ??? Miles...sold

I back together. Thanks!

__________________
1994 C 280 117.5k, White (Good as new)
1997 Toyota Camry 149k Miles (Not so pretty anymore)

1990 190e 2.6 95k (Sold-Should not have)
1981 240d Stick ??? Miles...sold