Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-24-2004, 04:28 PM
Posts: n/a
1967 250SE voltage regulator

I have replaced the alternator and now apparently need to replace the voltage regulator. My original has four PINS that plug into the harness. I cannot seem to get an original voltage regulator, I now have TWO newer replacements with blade connectors. I know the DF, D-, and D+ pinouts of my alternator and of course, know how the harness plug attaches, but continuity tests between the plug to the alternaor and the plug to the orignial voltage regulator don't provide much help in figureing how to attache the new voltage regulator. Help PLEASE help.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page