|
|
|
|
|
#1
11-17-2007, 10:59 AM
|
||||
|
||||
|
82 300SD body problems
I noticed today a big rust spot that suddenly appeared on the passenger side wheel well. I had been obvious to me that the car was badly pained before I got it. I've now found out *****y body work was done. They slapped bondo on it and called it a day.
I was wondering if anyone had a 126 out there that a section could be cut out of. I figured I'd MIG weld in a new piece after cutting out the rust BUT I need to find a donor. Junk yards will generally not cut out such a small piece. Especially on the cheap.
__________________
1982 300SD 1967 250S ...what was I thinking...... 
|
|
#2
11-17-2007, 03:15 PM
|
||||
|
||||
|
I think sherman auto parts in Michigan carries the wheel arch sections. They are around $40.
__________________
1959 Gravely LI, 1963 Gravely L8, 1973 Gravely C12 1982 380SL 1978 450 SEL 6.9 euro restoration at 63% and climbing 1987 300 D 2005 CDI European Delivery 2006 CDI Handed down to daughter 2007 GL CDI. Wifes 
|
|
#4
11-17-2007, 09:50 PM
|
||||
|
||||
|
Quote:
Here is what they carry for Mercedes. It looks like they don't carry the wheel arch sections for the 126. They do have them for a 116 and 123 though. I have found the quality to be excellent.
__________________
1959 Gravely LI, 1963 Gravely L8, 1973 Gravely C12 1982 380SL 1978 450 SEL 6.9 euro restoration at 63% and climbing 1987 300 D 2005 CDI European Delivery 2006 CDI Handed down to daughter 2007 GL CDI. Wifes
|
 |
| Bookmarks |
|
|
Linear Mode
