![]() |
|
|
|
#1
|
||||
|
||||
W108 Windshield Wiper Mechanism Replacement
What a brutal job this was. Getting the broken assembly out was difficult enough but installing the replacement proved to be even harder. Ultimately I removed all of the defroster duct to gain relatively clear access and that in itself was quite a chore.
I also replaced the heater controls since the originals had dried up and disintegrated. Also going to replace the heater valve o-rings while I'm in there. Can't get the heater blower to run either so looks like I'll be removing that. I have a parts car with the blower still in it so I'll do that first for practice. I understand this is a very difficult task so any tips would be appreciated. The dreaded heater blower. ![]() Heater valves ![]() New heater controls ![]()
__________________
Joe ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1980 300SD - 495k miles - 'The Ambassador' ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Former Family Members 95 C280 73 280SEL 90 300D 87 300SDL (X2) 86 560SEL 84 300D 80 300SD |
#2
|
|||
|
|||
Start with taking the front seats out for access 4 bolts each, the trick with seats is to install the spring last.
|
![]() |
Bookmarks |
|
|