Heater core vent removal

[Wolfbane323]

Im having trouble removing my vents for the heater core, not sure where to go after removing my amplifier and glovebox. I tried pulling the passenger side vent out but i cant get it out and i tried removing the arm for the wiper motor and it didnt help either. Kind of stuck atm

[Mike D]

Please post what you are working on. If it is your car, put it in your information.

[Wolfbane323]

Originally Posted by Mike D

Please post what you are working on. If it is your car, put it in your information.

Sorry, its a 1960 mbz 220Sb and i have a link to pics on google here https://photos.app.goo.gl/2fgasHhQQKwmR63f9 anyway i wanted to know how to take the air vent off the cores on each side

[meltedpanda]

what do you exactly mean by vents? The car is basically built around the heater core ( lol) and IIRC most of the plastic housings are attached to it and the blower ?

[Wolfbane323]

Originally Posted by meltedpanda

what do you exactly mean by vents? The car is basically built around the heater core ( lol) and IIRC most of the plastic housings are attached to it and the blower ?

I mean i have black plastic vents that turn to tubes that go from the cores on each side to the dash vents and then go to the back of the car to allow fresh air to reach the back, i need to know how to remove the plastic pieces on the sides of the cores that direct airflow is what im saying

[dobrodan]

Here are the dirx from the FSM.

[Wolfbane323]

Originally Posted by dobrodan

Here are the dirx from the FSM.

Magnificent!! Thanks for the pages! Can you upload the whole file on here? Or like parts for what the instructions refer to like different figures and procedures?

[dobrodan]

I don't understand the question. That is the procedure.

[Wolfbane323]

Originally Posted by dobrodan

I don't understand the question. That is the procedure.

Well in certain steps it says refer to figure so and so but its not in the pages you sent because it refers to an earlier procedure which keads up to this one