Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-30-2020, 03:30 PM
Registered User
 
Join Date: Aug 2004
Posts: 77
Frank: Sorry for the delay, real life keeps getting in the way. :-)
"When warm and driving the gauge is reading at the unmarked line between 175 & 250 F."
Ambient temperature about 70 F.

ambient when it "ran too cool"
That was quite a while ago, I would guess 45F, and there was insufficient heat in the car.
Since then I had set the valves, changed plugs, tightened carb and cleaned coil contacts. I had previously bypassed the dropping resistor for the coil as the
Flame Thrower coil was able to handle the extra current and the resistance of the coil
was within spec, over 3 ohms?
I have yet to check the timing at 3,500 rpm, and check the rad with a laser thermometer.
You are correct about the manifolds.
It has also been suggested to reverse blow the rad with compressed air to insure it is not blocked.
Hopefully next week will provide time to do these and report back.
DougQ
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page