![]() |
|
|
|
#1
|
|||
|
|||
1956 220a crankshaft
I have a 1956 220a with engine number 180.921.6502914. The crank in the engine is part number 1800310801 with other numbers 37CR4 and A906/6. This crank has been cut to the limit previously and may need more now due to one bad rod journal. Rather than welding, I do have access to another crank with part number R1800311401 with other numbers CK45 A906/24 which looks like it came from a 60s 220s or 250. Anyone know if I could use this 2nd crank in my 220a?
|
#2
|
||||
|
||||
a good machinist should be able to lay them side by side and check and measure them. There is a guy in Terre Haute who can weld it up an turn again.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
![]() |
Bookmarks |
|
|