Hi,
My 2001 ML 320 A/C condenser has a leak and needs to be replaced. I'm
planning to do it myself - getting the condenser in/out doesn't look to
bad once the cross member (where the hood latch is located) is removed.
I already bought a r134a recharge kit and have a couple of questions.

1) Is the recharge port the fitting located just inboard of the driver's side
headlight?
2) If so, how do you get the plastic cap off?? I wanted to verify the fitting
on my recharge kit will fit, but I can't get the cap off short of breaking it.

Any suggestions/advice would be appreciated.

Thanks much
Dave
__________________
dac

__________________
dac