I'm pulling the motor out of my donor car and I'm all done except for the mini struts on both sides of the motor. These are the little struts that are by the motor mount. I guess they are there to dampen the engines movement.

The Clymer manual says to hold the little rod down with a wrench while turning the 10mm bolts on the underside of the struts. I see that the littl rod on the strut is slotted to accep a wrecng but I can find th right size to fit it on.

Anybody know the right size wrench to hold that rod down ?

__________________
1985 300D : the clean one 180k miles - Now passed onto my parents.
2000 E39 M5
2002 e46 330xit
1991 mustang notch (project)
1970 chevelle (project)