Quote:
Originally Posted by Hit Man X
Have std and metric line wrenches already  Should I invest in some Crow's Feet?
I have all new green o-rings too...
Any tips on how to flush the evap core out while I'm in there? I recall something about the old valve is used to do this?  |
I don't think crow's feet will fit in there but they are good to have. Especially for torquing the injector lines.
There is a way to use an old valve to flush from outside the car but I don't know how to do that.
What I did was I got some clear tubing from Ace Hardware and clamped them to the evaporator lines and poured the flush and compressed air through from outside the door.
I forget the size of hose I used but you can measure the size on the new valve or bring it with you to the store.
Danny