Quote:
Originally Posted by tomjode
I have replaced the wiring harness on my 1995 E320 Cabriolet. Also I replaced the wiring on the Electronic Acelerator. I am having an issue(s) that I am hoping someone can help me with.
The Check Engine light comes on a day or so after clearing codes. The ASR light is always on.
I have pulled the following codes,
Pin 3 =
6 - Idle speed control faulty
Pin 8 =
8 - Idle speed control (ISC) system at upper or lower control stop or
CC or EA indicates "limp home" mode.
Pin 14 =
3 - Right EA/CC/ISC actuator (left cylinder bank)(M16/1)
11 - Closed throttle recognition signal to engine control
module (HFM-SFI).
Fuel safety shut-off to engine control module (HFM-SFI)
14 - Closed throttle position contact switch
\
Any help or insight would be appreciated. Hopefully I have not provided to messy of a description of my troubles!!!
|
Check out MENU#24 on my page for a similar problem. . . in fact it's pretty much identical. The culprit was the "ETA", Electronic Throttle Actuator, not the EA.
Another area to check is the "wiring harness"; check for frayed wires, etc.