Quote:
Originally Posted by Clancy
I bought a Valiant Keyless Entry System Model 2RTA from J. C. Whitney for my 1983 300SD. Does anyone know what wires I need to connect to in the wiring harness to make it work?
Thanks for your help.
|
Ground the black, blue & gray wires.
Power to the red, white & brown wires.
If you want your doors to lock/unlock when the ignition key is on/off, then connect the purple wire to power when the ignition key is on.
Yellow wire and green wires connect to a two wire actuator.
Orange wire is output activated by holding down the trunk button on the remote for a few seconds.
You can just leave the orange wire unused if you have nothing you want connected to it.
Follow directions by Craig here:
http://www.peachparts.com/shopforum/showthread.php?t=136431&highlight=keyless+entry
This unit is also sold under the name: CHEETAH KE1
Manufactured by ICD or I.C. DYNAMICS