Other than using a timing light after it is installed it isn't any big deal. After removing cap set to TDC & check rotor alignment, Set the replacement to the same installed position. That should be close enough that engine will still start, then use the timing lamp.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator