John:
Nothing all that special needed, nothing you either don't have or couldn't buy at Sears or an auto parts store.
You'll need to get the wires off the sparkplugs, do a plug wire pulling pliers, the spark plug socket, extension and ratchet, that's all common stuff, and to do it right you should be gapping the plugs to .032", so a plug gapper tool, and you should be torqueing the plugs on a 103 motor at 20nm, you may want to get a torque wrench to do this if you don't have one. it's a good tool to have anyways.
Be sure to use the approved Bosch Super spark plug, these are non-resistor type plugs
Gilly
|